Pool Disinfectants 101

Pool Disinfectants 101

Blog Article

There are many aspects to pool maintenance, and even more to knowing which pool supplies are right for you. Check out these frequently asked questions for more information on pool and spa supplies.

The most commonly used pool cleaners today are the suction-side driven and pressure side-driven cleaners. A more advanced option is the robotic pool cleaner. Older pools may still use a return-side pool cleaner. However, most people have switched to more modern types. A return-side cleaner requires a dedicated pump to work. It also needs large volumes of water, making it more high-maintenance. These factors have led to their decreasing popularity among consumers.

It is still important to have a liner for in-ground pools because these pools are still susceptible to damage. Liners can also protect from algae and other surface contaminants and the designs can offer a fun change from the bare look of your pool.



Manual cleaners are definitely the most affordable type. But these kind need more time, and if you consider that time is money, then these kind are certainly not the best pool cleaner kind for you! The manual cleaner connects to a pole. The unit attaches to the pool's filter via a hose-pipe. It sucks the dirt from the bottom surface of the swimming pool and transfers it to the pool's filtration system. During this whole process, you have to physically push the pole so that it covers the entire floor of the swimming pool. It requires some physical effort, and might also require more strength and energy, especially if the pool is big. Aside from that, it may not be fun to stand out under the scorching heat of the sun every day as you vacuum your swimming pool.

There is little doubt that a swimming pool must be kept clean in order to fully enjoy it. There are clearly a number of choices for cleaning systems, but not every choice is ideal for your swimming pool. For a reliable automatic system, most people go with a robotic cleaner. It is effective and will fit the budget of the majority of pool owners. However, for tougher jobs, such as a rebotic pool cleaners that is affected by debris from surrounding trees, a pressure cleaner works great. If debris is not an issue with your pool, a suction type of cleaner will likely do a great job.

Another choice is the suction type cleaner which does not have a debris bag. It can suck very fine particles to your pump basket and through your filter. It is also effective in scrubbing walls. It does not need any additional pump and is less expensive than the other cleaners. It is ideal if the debris you find in your pool is not the tree leaves. With this type of pool cleaner, you will need a clean filter to make it perform efficiently. One outstanding brand is the Hayward Vac Ultra which is easy to install and to use. It includes inline vacuum gauge for setting proper suction levels, 40-foot hose and all connections. This cleaner costs around $400 to $500+.

Your pool pump is the main mechanical part. In some pools this is the only component that has moving parts. Essentially the pump draws water from the skimmer and forces it through the plumbing so that the water can be filtered. It has an impeller that acts sort of like a propeller to move the water. Most pumps are run off of a timer so that it is an automatic operation. Single and pool cleaner variable speed pumps are used.

There is excess wear on the bottom of the cleaner, and the wing hooks have probably broken off the pods. The shoes are worn, and the vacuum in the cleaner hose is probably too high. Use the vacuum gauge to measure the vacuum in the cleaner hose. You should have 1" of vacuum per section of hose. Replace worn components.